|
|
|
|
|
Charge amplifier
|
|
H4083 is a low-noise hybrid charge amplifier designed for a wide range of spectrometric applications including soft X-ray and low to high energy gamma-ray spectrometry.H4083 is especially suited for use with Hamamatsu S3590/S3204 series, etc. Si PIN photodiodes.
|
|
|
Color sensor evaluation circuit
|
|
C9331 is an evaluation circuit board specifically designed for Hamamatsu color sensors. Color sensors that mount on C9331:S7505-01, S9032-02
|
|
|
Color sensor module
|
|
For RGB-LED backlight monitoring for TFT-LCD
|
|
|
Color sensor module
|
|
|
For RGB-LED backlight monitoring for TFT-LCD. 7 times higher gain than pin-compatible C9303-03.
|
|
|
Driver circuit for Si photodiode array
|
|
Driver circuit for 16-element photodiode array for S4111-16 series, S5668 series, S8592 (not included). Hamamatsu S4111-16 series, S5668 series photodiode arrays are directly mountable on board.
|
|
|
PIN photodiode amplifier
|
|
C4890 wide-band amplifier, when connected to a high-speed PIN photodiode (S5791, S5972, S5973, etc.) converts optical signals at a maximum of 1.5 GHz into voltage outputs with exceptionally low distortion and 20 dB gain.
|
|
|
Photodiode module
|
|
Integrates a Si photodiode for precision photometry with low-noise amp, active area: 2.4 x 2.4 mm
|
|
|
Photodiode module
|
|
Integrates a Si photodiode for precision photometry with low-noise amp, active area: 5.8 x 5.8 mm
|
|
|
Photodiode module
|
|
Integrates a Si photodiode for precision photometry with low-noise amp, active area: 10 x 10 mm
|
|
|
Photosensor amplifier
|
|
Light-to-voltage conversion amplifier with optical fiber and built-in photodiode. Built-in photodiode allows easy detection of light just by connecting to a voltmeter.
|
|
|
Photosensor amplifier
|
|
Current-to-voltage conversion amplifier for high-speed Si PIN photodiode. Just inserting the photodiode lead pins makes the connec-tion. (Compatible with TO-8, TO-5 and TO-18 packages)
|
|
|
Photosensor amplifier
|
|
Small on-board type current-to-voltage conversion amplifier
|
|
|
Photosensor amplifier
|
|
C9329 is a current-to-voltage conversion amplifier used to amplify very slight photocurrent from a photodiode with very low noise. C9329 operates on the built-in dry batteries so it can be easily used anywhere.
|
|
|
Signal processing unit for photodiode module
|
|
Specially designed for photodiode modules (C10439 series)
|
